90 degree curtain rod connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connect thread type curtain rods at a 90 degree angle.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Found a cool curtain rod online that is shipped in multiple sections, which screw together with embossed threads. This model lets you connect two rod sections at a 90 degree angle.
curtain-rod-connector.stl
Split the model in half in your slicer, and print both sides on the large flat side. This avoids having to use supports, and keeps the threads printing clean. The coupler part will hold these two halves together once assembled.
curtain-rod-coupler.stl
Print oriented on it's end, standing up, in spiral vase mode, with no bottom layers. This model is rendered with the expectation of using a 0.8 mm extrusion width. If not printed with 0.8 mm extrusion width, it will be too loose of a fit over the connector and the next rod segment. 0.8 mm extrusion width prints just fine with a standard 0.4 mm nozzle.