Advanced Shock Mount For Fifine AM8T
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adjustable shock mount originally created by The Printing Pilot!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Introducing the "Advanced Shock Mount For Fifine AM8T". This model is based on The Printing Pilot's original design with the addition of free movement. I needed to change the mount due to my partner having issues while streaming (Here is her page xlittlefootxo and mine Manager_Josh).
NOTE: This does add about an inch-1.5 inch in length from the mount to the boom arm however it may be bennificial to you.
You will need:
- 4 30mm OD 25mm 2.5mm width O Rings (per The Printing Pilot)
- 1 M6 x 30mm (Placed in the neck of the mount)
- 1 M6 x 20mm (Placed in connection to the two rotator necks)
- 2 M6 Nuts (one placed inside of the swivel neck and one to tighten on the tilt neck)
Optional: You can find a washer or washers to protect the print from wearing down. Loctite or other adhesives on the bolt may be beneficial to hold the tension on the swivel neck.
Settings:
- 3 walls
- 5-10 percent gyroid infil
- 3-5 top/bottom layers
- Use the paint setting in your slicer for a multi color logo on the mount as I have
You could certainly print this in PETG however expect the overall print to be heavier. PLA and PLA+/pro/lite have all worked just fine for me without fail.
Feel free to comment or message me if you have any questions as I am chronically online <3
Happy Printing!!