1 / 1
TPU buffer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I printed it out of TPU 40D but i sugest using even softer TPU.
Print settings: 0% infill and 1 perimeter.
When it’s printed, try placing the buffer onto the bracket. If it doesn’t fit, trim the edges of the buffer with scissors and try fitting it on the bracket again. Once it fits properly, apply some superglue to the bracket and glue the buffer in place. That’s it.