Filter for Mars 5 ultra printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filter witch is able to remove some typs of VOC from your printer SLA
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Granulate filter for SLA printers. The final activated carbon wall thickness is 90mm, which, when used with a 120mm fan, ensures good VOC filtration, or at least a certain range. The purpose of this filter is to remove odorous compounds to improve printer performance. My setup involves directly connecting the cormora to the filter. Then, a P1 pipe is routed, approximately 800mm long. Next, there's an F1 exhaust fan. Then, another P2 pipe, approximately 1000mm long, is connected to the window using an adapter. This ensures satisfactory odor filtration between the filter flaps. Use gauze to retain the granulates inside the cylinder. You'll need M5 screws, something like 12mm.
Medical gauze, e.g., cotton gauze
1.5mm (Fi) filter carbon
TPU thread to seal the filter covers.
Pipe 120mm (FI) My sugestion to parts 1m.