1 / 2
umbilical for z on micron
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
i found that the tool had PCB that would grab the wires on the Z chain, so I opted for an umbilical
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
You will need an M3x12. You may be able to get away with an M3x13 and two extra nuts on the back, and some cable sleeve to keep all the wires together. I used a ziptie to keep the sleeve at the box where the wires come out, and one at the electronics on the sleeve