1 / 4
Spice Rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Prints with almost no supports. I used PLA but PETG could ease future washing steps.
Only requires supports for the top parts for the metal rod slots.
Additional required hardware:
4x ~13,2cm long metal rods with 6mm diameter (I used 6mm hollow aluminum rods from local hardware store)
The metal rods were cut to length and are a tight press fit. Using a hammer with a piece of wood to distribute the force can help.