Monster Chest - Open & Closed - Mimic
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix created to improve printability and enhance the model’s details.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 59
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary:
The original design contained gaps that resulted in very thin and structurally weak features when the model is scaled to DnD miniature size. This remix addresses those issues by filling the gaps and adding wood plank details to the exterior for improved aesthetics and durability.
A closed version is also provide to add an element of surprise to your campaign or just to be used as a regular treasure chest.
Example Print Settings:
Material: Polymaker PLA
Nozzle: 0.2mm @ 220°C
Bed: PEI @ 60°C
Layer Height: 0.07mm
Note: Custom speeds and profile were used for this nozzle size on a Prusa MK3.5s. Standard default settings for a 0.4mm nozzle will also produce excellent results.
Supports: Supports are strongly recommended inside the mouth and at the corners of the mouth. Printing without supports produced rough results in testing. While unsupported teeth may have a slightly rough appearance, it can also complement the horror aspect of a mimic. After testing multiple configurations, the standard snug support settings proved to be the most effective however you may need to dig them out around the tongue.