Rigid Pro Gear System Gen 2.0 Divider for Small Bins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is simply a cross bin divider for the Rigid 2.0 small parts organizer. Only for the small bin currently.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a two piece divider system for the small bins in the Rigid 2.0 10 Compartment Small Part Organizer. Since it is a two piece model you can choose to use one or both pieces in your model. I am also including the openSCAD script so you can easily adjust the parameters to fit your own needs.
The model was built with the help of Google Gemini using openSCAD to render.
-- Updated the files as I realized there were not quite reaching the bottom of the bins. It seems the bin heights vary by a mm or two so you may need to customize for your bins.