Voron trident/2.4 FT-EMS Backpack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows for the placement of various components on the printer’s rear and side panels.PMC compatible.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 8
- Makes
- 0
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After building a Voron Trident 300 with insulated panels, I found that the heated chamber reached 70 degrees Celsius when printing with ABS. To allow the print head board to operate under these conditions, I decided to move the print head board outside the heated chamber while maintaining ease of maintenance and connectivity.
In addition, the backpack can accommodate other components that require quick access—such as USB hubs, a multimaterial board, various interface boards, relay blocks, etc.
We would like to express our gratitude to Fizzy https://www.printables.com/@FizzysTech whose models were not directly used, but whose FT-EMS standard was adopted