Fly Tying - Flash Tower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3 part flash tower that is 33CM to hold long flash. Note it is designed to have a turntable inserted in the base
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 18
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3 part flash tower that is designed to be 33CM to hold longer flash.
Note it is designed to have a turntable inserted in the base which I have linked bellow to help.
https://www.amazon.ca/dp/B0C7JFG71W?ref=ppx_yo2ov_dt_b_fed_as
This is a 60mm x 15mm.
The turntable will protrud below the base so some foam is suggested.
Honestly though it is totally optional as without the turntable it is stable and working.
During testing, I didnt even glue the components together and it worked fine.
A must is the screws that hold M6x10mm or a bit longer is fine. Know that the total depth is 20mm so longer will not work so good. You could glue but really not suggested for the functional print.
The screw hole is 3mm so the M6 3.2mm will grip well.
I printed this is PLA which should be fine but can not confirm other materials.
Also I added a slot for a hairband or elastic to keep everything in place.
This was all printed on a Prusa Mini+ so will fit any of the Prusa Printers and most of the non-Prusa models.