LayersFactory
Report model
1 / 1
Eggfinder LCD Case — image 1

Eggfinder LCD Case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mike Thomas

Mike Thomas

@MikeThomas_23145

A convenient tracker case for the EggFinder Rocketry LCD receiver with the LCD-GPS and EVM.

Rating
0 / 5
Likes
1
Downloads
12
Makes
0
Views
97
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike
DetailsFiles (1)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (1)Related

  1. Eggtimer Eggfinder LCD

  2. Eggtimer LCD GPS

  3. SS23E04 Double Toggle Switch 8 Pins

  4. 12mm Push Button Switch

  5. 18650 Series Battery Holder

  6. Multi-Cell 2S Type-C To 8.4V Step-Up Boost LiPo Polymer Li-Ion Charger

  7. 2S 20A 7.4V 8.4V 18650 Lithium Battery Protection Board/BMS Board

  8. M2x6 Screws for the Switch

  9. M3x25 Screws for the LCD

  10. M3x8 Screws for the Case Back

  11. M3x12 Screws for the GPS

  • The spacers in the 3MF are for between the LCD panel and receiver board.

  • No spacers are included for the GPS as I use M3x6 Stand-Offs with a M3x6 Screw and Nut.

  • The EVM module gets wrapped in electrical tape and floats inside the case. The Audio jack is wired remotely with about 4" of wire.