NERF MEGA BIGSHOCK/TALON Removable Little Rocket Barrel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NERF MEGA BIGSHOCK/TALON Removable Little Rocket Barrel and elite Barrel.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 19
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Today, I stumbled upon a poor Bigshock with a snapped plunger. The little one could be saved, and so I did. The Posibilities for a compact shotgun pistol were something I had in mind with it. I remembered the design of thepaperskeleton for the insert, and I added more functionality with the recently released OUT OF DARTS little rocket barrels (for possibilities with simple hardware). Then the Spring was upgraded a bit (to 5kg), and the little one had quite a pop.
Might be done a bit roughly, but the proof of concept worked surprisingly well. So I give it back to the community.
Just swapped the Rival Functionality for Little Rocket Barrels. It can stand-alone fire elites and halfdarts with a stock spring (and even better with a stronger spring). My favorite is the 3x Elite barrel; the spread and distance are decent.
HARDWARE NEEDED:
• 1 16mm O-ring (if the oring is too thin, it might pop out, and a bit of glue will probably solve that)
Print it with the barrel lug facing the print bed.