Triumph Tiger Replacement Buttons
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement buttons for the turn signals and menu joystick
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 42
- Makes
- 1
- Views
- 194
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
These are basic replacement buttons for the turn signal switch and menu joystick on a Triumph Tiger. I modeled them based on a 2023 Tiger 900, but they may work for other years and other Tiger variants (1200, 800?).
They're pretty simple, but check back later as I'm planning to make some variants that are a bit closer to the originals.
The fit is not perfect, but pretty close. I strongly recommend using some (weather/environment appropriate) glue to make sure they stay in place.
Print Instructions
The menu button should be printed with the opening upward. No other special steps needed.
The turn signal button should be printed "flat", in the orientation that it mounts. No supports should be necessary as the over-hangs are very short.