v2 Filament Sample Swatches with Honeycomb Wall System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated version — Build a showcase for your filament samples!
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 21
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printables didn't let me edit my own model, so here is version 2 as a remix of the original ☹ 😡
Version 2
04-27-2026: Grid is now modular. Simply snap-fit elements together. Some minor changes to swatches. Versions 1 and 2 should be compatible.
Introduction
I love xyren's swatches to show off my filaments but I just couldn't handle this POS called IKEA Skadis anymore. All of the slot openings seem to be of slightly different size, and inevitably swatches will fall out, or they're stuck for good. Trying to come up with a better solution, I blended the design of those swatches with the idea of a honeycomb wall system, specifically the one designed by RostaP. I needed a larger cell size so I tried to use Edwin Eefting's OpenSCAD script to generate honeycombs but ran into a lot of issues and artifacts once I deviated from the default cell sizes. I ended up reimplementing the idea in Fusion 360.
Print and Assembly
Print the desired number of grid components. Each one holds 5 swatches. Use supports from print surface; they're easy to remove. Simply press-fit the grid components together. You may add a drop of superglue. In my hands, no glue was required to get a stable connection.
Print swatches, then slide them into the honeycomb cells of the grid. I write the material, brand, and color on the back with a Sharpie.
Caveat: The parts are sized for a comfortable press-fit, not too tight and not too loose—on my printers. But your printer may have different tolerances, plus any given filament may simply extrude a bit more or less material. In which case you may want to either increase or decrease the extrusion factor a bit, or scale the swatch up or down by 1% or so.
I have included 3mf files with labels for common materials, which I use to group categories of swatches. Two versions: One is configured for multi-material printers such as the XL or MMU, the other is set up for a manual color change on standard printers. To change the label text, simply use Prusaslicer's edit text function to adjust the text.
To mount the grid to the wall, I have added a special Wall Mount tile.
STEP file included for easy customization.
v1: The basic grid has 25 slots and fits on a Mk3/Mk4 print bed. I didn't bother with any fancy lock and key system, I just used SuperGlue to glue the parts together to make a larger surface. The Mount Wall tile can be used to attach the grid to a wall, or use nails or sticky tape.
Update History
v1.2 12-30-24: Added crush ribs to help keep the swatches in place even if a material is a bit underextruding. Fixed angle of countersink in wall mount.
v1. 01-16-24: Added cutouts to the sides of the swatches, to make them easier to remove from the grid.