1 / 2
PCB Standoff for Aquarite salt systems display
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a PCB Standoff for the display in an Aquarite salt system.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a PCB Standoff for the display in an Aquarite salt system. The originals in my system had degraded and snapped. I whipped this up quickly so I could get the device up and running again, there could likely be tweaks to get them to work a bit better or to eliminate the need for supports, but the device is repaired and back in service so calling it good. :) These are made for a 30mm standoff, but STEP files are included if you wish to modify these to suit your needs.