BeefEater 2000 Series Grill Knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace your missing grill knobs with a printed one.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: I'm happy with the knobs, and they work great for regular grilling (maybe a couple burgers with two burners on for 15-20 minutes). But one day I had all 4 burners going for 45+ minutes, and it seemed like the PLA was getting soft on the metal valve shafts. You might try ASA, ABS, PETG, or Polycarb instead. .... Replacement knob for the 2000 Series BeefEater Grill, styled to match the stock knobs.
The original knobs have a piece of spring steel in them, which helps fit the knob to the shaft of the gas valve. I could not duplicate that feature, so I tried making a tight tolerance on the hole for the shaft. That kind-of worked, but because of small print-to-print difference, some of the knobs would not fit. Ultimately, I made the shaft hole in the knob slightly smaller, carefully heated the hole, and then pressed the knob on to the valve shaft, which gave me a nice zero-tolerance fit.