EFX Spinner - for bigger prop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spinner for a larger prop for your EFX Racer
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: I had a couple of these spinner fail at high RPM. (A thin part of the cone around the prop cutout would break off. That's on me, not the original designer, because I changed that when I enlarged the cutout.) I've updated the model with some reinforcement. The new, stronger model is EFXSpinnerConeBigPropR4.stl
(I'd recommend NOT using EFXSpinnerConeBigPropR1.stl, but I've left it here in case someone needs it.)
Nice original spinner design. I remixed the spinner to make a larger prop cut-out in the cone. I'm using an Aerostar 6x4 Carbon fiber on the EFX. The Cone STL is new. The Base STL is the same as the original.
Notes:
I print the Cone nose-down, with supports, then clean-up the support and brim with a file. For toughness, I'd suggest you print as hot as you can for the filament you are using. I'm at 220c for PLA.