lampshade with cheese grater mesh (ikea GRÖNÖ)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
another lampshade for ikea GRÖNÖ
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 11
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
parts needed
20x m3x16(or m3x12) hex bolts
4x m3x8 hex bolts
24x m3x5x4 heatset insert (optional)
1x ikea GRÖNÖ
some felt or some rubbery material to put on the bottom (i used a old mousepad)(optional)
some superglue
printing guidelines:
parts are already in the correct orientation, use support on build plate only. use a 0.4mm for all accent pieces. 0.2mm layer height, 20%infill, 3-4 walls and 4-5 top/bottom layers.
assembly:
use a few tiny drops of superglue to mount accent pieces. place the mesh pieces inside of the side/top panels (i also used a few drops of glue in this step, but its not needed). install heatset inserts (only when using the version that requires them). assemble the bottom pieces with 4x m3x8 screws and place the ikea grono on top, assemble the top pieces with 4x m3x8 screws and place on top of the grono, mount the side panels with the remaining m3x16 screws.