Prusa USS Drybox Filament Clip Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A convenient place to store your filament clip, Grandma's Favourite edition. Retains stackable ability of the drybox.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 19
- Makes
- 0
- Views
- 909
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A simple bracket & mount for storing your filament clip, in this case, Grandma's Favourite filament clip. This is installed around the desiccant/silica hatch on the Prusa USS Drybox. It slips around the lip of the hatch/panel and it lets you store your Grandma's Favourite Filament Clip while your filament is stored in the drybox.
I would suggest PETG, 0.4mm nozzle, 0.2mm layer height, and enable supports. Infill was 20% gyroid. Orientate the model with the long brackets closest to the printbed, and add supports. When removing the supports, they will be thicker than the actual model bracket components so take your time removing them. I used a small flat head screwdriver.
There are 2 variants for each side of the drybox, depending on what orientation you require.