Dishfinity Sponge Rack: Modular sponge and soap holder

Can be used for sponges, soap dispensers, dish wands, dishes(if you make it big enough), etc. This has two versions, one without magnets and one with magnets embedded in the frame(for rust prevention). The Clickfinity system is based on jerrymk's design and the normal gridfinity is a modified version of pcnc's parametric gridfinity model. I also used https://gridfinitygenerator.com/en/ to generate the boxes.

STLs: 

• STL files range from 2x2 to 5x5(don't know why you got that many sponges but you do you)

• This is originally meant to be mounted on the right of the sink but can be used on the left side by choosing the file with the dimensions flipped. Ex,(4x3)righthand, (3x4)lefthand. 

Bins: 

• Bins come in 2 variants: magnets and no magnets(for Clickfinity).

• Comes with drainage holes

Model Editing:

• The two editable models are f3d files, so you will need Fusion 360 to create your own.

• One contains the Clickfinity rack and drip tray and the other just the Gridfinity rack.

• To edit, go into parameters and edit the 'xCells' and 'yCells' in the "Favorites" section.

Printing:

• Can be printed with your favourite print settings, but the drip tray is sloped, so it's better to print with a smaller layer height to prevent water stagnation.

• Printed mine in PLA, but it should be printed in a more resistant material like ASA for long-term use.

• If you are using the magnet version, you will need to add a print pause, and the magnets are 2mm x 6mm circle magnets. 

If I've missed anything or if you have questions, feel free to leave a comment. Otherwise enjoy!