Star Trek: Discovery Tricom Badge (15x2 mm Magnets)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of Star Trek: Discovery Tricom Badge with larger magnets
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution
The Original tips and filaments are great, so these are copied from the above source, with the change to the magnet size and one filament change.
Printing Tips
Body - Print the body flat at .05mm layer height and used supports. Recommend 100% infill. You will need to do some support cleanup for the Delta to fit well but it should be easy to cut it out.
Delta - The deltas don't look so good printed flat, so they are tilted at 45 degrees to be printed at .15mm layer height with supports.
Wedge - The wedge is standing tilted for best quality with silk PLA. Use supports, 100% infill and .15mm layer height.
Quality improvements - reduce external perimeter speed to 25mm/s and set filament extrusion/flow rate to .98 or 98%.
Uses 15x2mm magnets.
PLA filaments used were:
GEEETECH Silk Silver - Metal Shine
Ziro Silk Silver - shiny metal
CC3D Antique Gold - flatter but has a brighter gold top sheen
CC3D Silk Antique Gold - shiny brass look