1 / 2
Miyoo Mini Flip Grip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quickly knocked together grip for the Miyoo Mini Flip
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 73
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A quickly knocked together grip for the Miyoo Mini Flip. Held in place using the two screw holes at the top of the console and easily removable. The power and volume buttons and SD card are accessible.
Print standing up, support is required for the bottom "shelf" and the screw hole pins. I used PLA at 0.2mm layer height with a 0.4mm nozzle. Extra walls will reinforce the screw hole pins. Rough and ready FreeCAD file included if you want to tweak it.