adjusted Universal Spool holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.60 – €1.95 net (excluding VAT)
For file: altered_Universal_Spoolholder_0.4n_0.2mm_PETG_COREONEL_1h27m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.77 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 1.45 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Slightly adjusted dimensions for the spoolholder
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 1
- Views
- 167
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Open Community License v1
All credit belong to Prusa for the original model
Original Spoolholder wasnt fitting entirely through the hole of the spoolbox. At least not far enough to be turned and locked into place.
So I adjusted some clearance meassurements of the original model for it to pass through nicely now.