1 / 1
Replacement Lampshade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A simple lampshade I made as a replacement for a glass one I broke. The hole is 30 mm in diameter, the outer diameter at the top is 50 mm. The overall height is 200 mm.
I printed it in signal white PETG without supports. Make sure to place it on the bed upside down.