Wall Hook for XL Velcro Command Strip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple wall hook with a recess on the back for extra large size velcro command strips.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Simple scale-up of the large wall hook so the compartment fits an XL velcro command strip (23mm x 90mm velcro strip with a 21mm tab at the bottom). Tested with Atomic Filament MeltMiser PLA, organic supports, the compartment for the velcro strip facing the plate. Printing five together on the CoreOne's plate works well.
To remove the supports which fuse together into a single solid rectangle, use a thin pry-tool and gently insert it between the body of the piece and the supports at the shorter rectangular end, then lever it up gradually, moving the tool along the seam as needed. The supports ought to come away in a single large piece the size of the XL velcro command strip.
The resulting hook seems quite solid and I've been using it to hold XLR cables.