CRF1000 Africa Twin 2018 Givi Top Box Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rear luggage plate for mounting a Givi top box on a 2018 and 2019 Honda Africa Twin
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 45
- Makes
- 0
- Views
- 340
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a plate to mount a Givi Trekker Outback on the back of my 2018 Africa Twin, but didn't like the way the Givi/Kappa system worked in the SR1162 adapter kit, so I decided to design my own plate and get it laser cut.
Step file and DXF file provided for uploading to Xometry or other sheet metal cutting service. I ordered mine out of 5mm thick 6082 Aluminium, but you can use other alloys as well. Mine also has a anodized hard coat. Cost me about €70 to get it cut, anodized and shipped for reference. About half if you don't get it anodized, so much cheaper than buying a Givi M8/M9 plate and mounting kit.
Feel free to modify it for your own bike. The Givi and rubber holes are in good locations, so all you need to do is tweak the outline and the mounting hole locations. The photos should be clear as to which hole is what. Both 2D DXF and 3D Step file provided for editing.
The mounting hardware on the plate is from the SW Motech Givi/Monokey adapter kit that I got for €25. I also have it mounted on 10mm aluminium spacers to allow for the nuts on the underside of the rear pins. You could potentially make those holes smaller and tap them and screw directly to the plate if you want to do away with any spacers.
I drilled out the countersink on the holes myself for the main mounting bolts, as it would cost an awful lot to get done when getting the plate cut. On the Africa Twin the mounting bolts are M8, and the holes are drilled out with a 16mm countersinking drill bit.
Will fit on 2018 and 2019 Africa Twins.
I appreciate that this is a niche use case, but if it even helps one person either get a plate or get the hole spacing right on a plate they are designing that's a win.
Not intended to be 3D-printed other than for fitment test