1 / 5
i3 mega Lüfterhalter Treiberkühler 50mm Lüfter / i3 mega fan holder driver cooler 50mm fan — image 1
1 / 5

i3 mega Lüfterhalter Treiberkühler 50mm Lüfter / i3 mega fan holder driver cooler 50mm fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Lüfterhalter für 2x50mm Lüfter z.B. von Sunon. Je nach Lüfter benötigt ihr die Passenden Schrauben und Muttern Zum…

Rating
0 / 5
Likes
0
Downloads
11
Makes
0
Views
130
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

Lüfterhalter für 2x50mm Lüfter z.B. von Sunon.

Je nach Lüfter benötigt ihr die Passenden Schrauben und Muttern

Zum befestigen am gehäuse werden 3x M3x6 benötigt

Die Bodenplatte dient zur abdeckung der Schlitze im Gehäuseboden, damit die Luft die Treiber richtig kühlen kann.

Hierfür benötigt ihr nochmal 3x Schraube M3x6/8/10 sowie passende Mutter und Scheibe

Diesen Umbau und weitere Umbautipps zum i3 Mega findet ihr hier: http://jogiarea.de/


Fan holder for 2x50mm fan e.g. from Sunon.

Depending on the fan you need the matching screws and nuts

For mounting on the case you need 3x M3x6

The base plate is used to cover the slots in the bottom of the case, so that the air can cool the drivers properly.

For this you need another 3x screw M3x6/8/10 and matching nut and washer

This conversion and more conversion tips for the i3 Mega can be found here: http://jogiarea.de/

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Doesn't Matter

Resolution:

0,2

Infill:

25%

Category: 3D Printing

Tags