1 / 2
Garden tap hose adaptor 1/2" to 3/4" — image 1
1 / 2

Garden tap hose adaptor 1/2" to 3/4"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

For connecting a hose pipe to a garden tap

Rating
0 / 5
Likes
3
Downloads
83
Makes
0
Views
192
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The thread adapter on my garden tap to the hosepipe split just as I turned on the tap and completely sprayed me with water. I would be happy to pay £2-3 for a replacement but I knew that there are various threads, so I measured and Googled what I needed. With this information on hand, I decided to design my own 3D printed adapter.

I tried various shapes but settled on this because it can be printed (thread to hot plate) with no support. I also made sure that my nozzle temperature was turned up by about 10 degrees to ensure that the filament layers were properly fused. Finally, the 3.5mm x 21mm rubber washer was retrieved from the split adapter to provide a good water seal.

3D printing settings

Printer: Creality Ender 3 Pro
Supports: No
Resolution: 0.2mm
Infill: 100%
Filament brand: Any
Filament color: Any
Filament material: PLA

Tags