Parametric NES / SNES / N64 / Genesis Cartridge Holder (Customizable Slots & Dimensions)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully parametric cartridge holder designed in OpenSCAD that lets you generate custom holders for game console carts.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 1
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A fully parametric cartridge holder designed in OpenSCAD that lets you generate custom holders for NES, SNES, N64, and Sega Genesis games — or any cartridge-based system.
This model was inspired by Emsea's Simple N64 Cartridge Organizer.
https://www.printables.com/model/1235338-simple-n64-cartridge-organizer
This model is based on a solid-shell design and preserves structural integrity while allowing full customization of slot count and cartridge dimensions.
You can:
Select a built-in console profile (NES, SNES, N64, Genesis)
Enter your own cartridge measurements
Adjust clearances for a perfect fit
Scale the number of slots vertically
Perfect for organizing collections, displaying cartridges, or building custom storage solutions.
⚙ How to Use
Open the
.scadfile in OpenSCADAdjust the variables at the top:
console_profile = "NES"; // NES, SNES, N64, GENESIS, CUSTOM
measurement_mode = "profile"; // or "custom"
slot_count = 3;(Optional) Use your own measurements:
measurement_mode = "custom";custom_cartridge_width = 120;
custom_cartridge_depth = 115;
custom_cartridge_thickness = 17.5;
Adjust fit tolerance if needed:
width_clearance = 0.5;
height_clearance = 0.5;Render (F6) → Export STL
📏 Notes on Fit
Designed for real-world cartridge variation
Recommended clearance:
Tight fit:
0.2–0.5 mmEasy slide:
0.5–1.0 mm
Different cartridges may vary slightly — measure yours for best results
🖨 Print Settings
Orientation: Print flat (default orientation)
Supports: ❌ Not required
Infill: 10–20%
Walls: 2–3 perimeters recommended
Layer Height: 0.2 mm
🧩 Customization Options
Slot count (stack height)
Cartridge dimensions
Console presets
Clearance tuning
Global scaling
🎮 Supported Systems
Nintendo Entertainment System (NES)
Super Nintendo (SNES)
Nintendo 64 (N64)
Sega Genesis (Mega Drive)
💡 Tips
If scaling up to many slots, consider increasing infill or wall count for strength
For very tall versions, you may want to split the model for printing
PETG recommended if you want a bit more flexibility/durability
📦 Included Files
Parametric OpenSCAD source (
.scad)Example STL(s)
🧠 Design Notes
This model is generated from a reconstructed solid mesh and converted into a parametric OpenSCAD workflow, allowing repeatable slot generation while preserving the original shell structure.
❤ If You Like It
Please:
❤ Like the model
🔁 Post a remix
📸 Share your prints!