1 / 10
2026 Direct to PolyDrier and Old Style Tag Holder — image 1
1 / 10

2026 Direct to PolyDrier and Old Style Tag Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Changes in lid design to accommodate Polydrier use, modified ID tag plates to use older style of filament tags.

Rating
5 / 5
Likes
8
Downloads
56
Makes
0
Views
356
Reviews
1

Updated at source:

Model information

Category
Accessories
License
GNU General Public License v2.0

Direct to Polydrier Remix - Why?

Been using the V1 and V2 setups of GunplaMark's dry boxes for a while and have been swapping around parts to get the filament in the dryboxes onto the Polydrier.  The V1 tended to leak desiccant which was annoying despite some remixes that help with that. 

I prefer the V2 but couldn't retrofit the V1s to V2 spec easily due to the location of the filament outlet from the container.

I'd also printed a complete set of filament ID tags for Bambu stuff and wanted to retain those instead of remaking new ones.

Looking at the 2026 design I decided to trial print one to see if I could retrofit my V1s to V3s, it worked but I really wanted the ability to put them on the Polydrier without messing around swapping lids out.

Changes to the Design

I've added the cut-outs to take the airlocks using Gamgroll's lid that uses the original cereal box lid gasket.  There are channels to drive air under the length of the desiccant box from the Polydrier inlet to ensure the desiccant tray is dried evenly alongside the filament reel.   The airlock cut-outs and associated support for the desiccant try have been re-profiles to ensure the airlock seal is engaging with the lid.

Tag holder plate has been adjusted to take the older type/size of filament ID tag used on both V1 and V2, this only fits the Skroam style containers.  I've also 3D scanned my 3rd party cereal boxes to produce a tag holder that fits them as well.

The system now works like a branded Polydrier box but with the added benefit of filament retraction and a larger desiccant cartridge and no more cutting holes in plastic cereal box lids with a knife.

Printing Notes:

The airlocks will need support enabled when printing, nothing else does.

Other Creator's Remixes Used but not modified:

Using Paw3Ds desiccant box (unmodified) and the blanking plug by MikeC to fill the original filament outlet hole on the drybox as part of my overall drybox setup.

Filament Used

Lids and internals printed in white ABS, airlocks in PETG with the TPU seal in 90A for a bit more 'squishyness'.  Filament bung is also 90A TPU, MikeC plug is in TPU for AMS and the filament ID tag is white PLA.  

Tags