1 / 2
Rotating Geometric Pendant / Otočný geometrický přívěsek — image 1
1 / 2

Rotating Geometric Pendant / Otočný geometrický přívěsek

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

EN Print-in-place geometric pendant with rotating circle. CZ Otočný geometrický přívěsek.

Rating
0 / 5
Likes
2
Downloads
16
Makes
0
Views
45
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Rotating Geometric Pendant

Print-in-place geometric pendant with a rotating inner circle.

The design is based on a simple geometric composition: an equilateral triangle, an inscribed circle, and a central vertical line. The circle is printed in place and can rotate freely after printing.

Important note

This is an original geometric pendant inspired by a well-known symbolic composition.

It is not an official product, not affiliated with any film, book, game, brand, studio, publisher, or rights holder. No official names, logos, characters, or protected brand elements are included in the model files.

Recommended print settings

  • Material: PLA

  • Basic / standard print settings

  • Print-in-place

  • No supports

  • Make sure your printer is well calibrated so the rotating circle can move after printing

After printing

  • Gently release the rotating circle after printing.

  • If the circle is stuck, carefully work it free without forcing the outer frame.

  • Fit may depend on printer calibration, layer height, and filament.


Otočný geometrický přívěsek

Print-in-place geometrický přívěsek s otočným vnitřním kruhem.

Návrh vychází z jednoduché geometrické kompozice: rovnostranný trojúhelník, vepsaný kruh a středová svislá osa. Kruh se tiskne přímo v modelu a po uvolnění je otočný.

Důležitá poznámka

Jde o vlastní geometrický přívěsek inspirovaný známou symbolickou kompozicí.

Nejde o oficiální produkt a model není spojený s žádným filmem, knihou, hrou, značkou, studiem, vydavatelem ani držitelem práv. Modelové soubory neobsahují oficiální názvy, loga, postavy ani chráněné prvky značky.

Doporučené nastavení tisku

Materiál: PLA

  • Základní / standardní nastavení tisku

  • Print-in-place

  • Bez podpor

  • Tiskárna by měla být dobře zkalibrovaná, aby se vnitřní kruh po tisku uvolnil a mohl se otáčet

Po tisku

  • Vnitřní kruh po tisku opatrně uvolněte.

  • Pokud drží příliš pevně, rozhýbejte jej postupně a bez nadměrné síly.

  • Přesnost pohybu závisí na kalibraci tiskárny, výšce vrstvy a použitém filamentu.

Tags