1 / 5
Decorative Bowl for Nuts or Sweets - no supports — image 1
1 / 5

Decorative Bowl for Nuts or Sweets - no supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€1.69 – €2.06 net (excluding VAT)

For file: nutbowl_HF0.4n_0.2mm_PLA_MK4S_1h8m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.87 excluding VAT (range midpoint).

Weight reported by the author
39 g
Print time reported by the author
1.13 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

A decorative small bowl for snacks, nuts, sweets. Also usable for small flower pots.

Rating
0 / 5
Likes
6
Downloads
41
Makes
0
Views
85
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Share Alike

A very simple bowl for sweets, nuts, or snacks. Can also be used to hold a flower pot. Or as a simple decoration.

No support structures needed.

The FreeCAD 1.1 design model is included if you want to modify it.

Printing

GCode for Prusa MK4S with the standard high flow 0.4mm nozzle using PLA is included.

You can also print using the prepared PrusaSlicer project (*.3mf) or the STL. Any material will work, no support structure is needed, so special settings needed.

If you plan to print in a transparent or semi-transparent material I would recommend to set infill to 100% to eliminate the infill pattern from being visible.

Tags