1 / 3
Foldable Keychain Phone Stand / Skládací stojánek na mobil na klíče — image 1
1 / 3

Foldable Keychain Phone Stand / Skládací stojánek na mobil na klíče

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

EN Print-in-place folding phone stand. CZ Print-in-place skládací stojánek na mobil.

Rating
0 / 5
Likes
9
Downloads
63
Makes
0
Views
197
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Foldable Keychain Phone Stand

Print-in-place folding phone stand designed to be carried on a key ring, lanyard or similar loop.

The model is printed in one piece and folds flat when closed. After printing, the joints need to be gently freed so the stand can move properly.

Two versions are included:

  • smaller version with one position

  • larger version with two positions

  • the larger version is also suitable for smaller tablets

The opened stand can be placed onto a key ring, cord or similar loop, and when closed it stays fixed on the ring.

Important

This is a print-in-place model. No assembly is required.

After printing, gently free and move the joints until the mechanism works smoothly.

Tested in PETG. PLA should also work.

Recommended print settings

  • Material: PETG tested, PLA should also work

  • Perimeters: default settings are sufficient

  • Layer height: default settings are sufficient

  • Infill: default settings are sufficient

  • Supports: No

  • Print orientation: as provided

Notes

The logo shown in the photos is not part of the model. It is only an example of possible customization.


Skládací stojánek na mobil na klíče

Print-in-place skládací stojánek na mobil navržený pro nošení na kroužku na klíče, lanku nebo podobném závěsu.

Model se tiskne jako jeden celek a v zavřeném stavu je plochý. Po vytištění je potřeba rozhýbat klouby, aby se stojánek mohl správně pohybovat.

Součástí jsou dvě verze:

  • menší verze s jednou polohou

  • větší verze se dvěma polohami

  • větší verze je vhodná i pro menší tablety

Rozevřený stojánek lze nasadit na kroužek, lanko nebo podobný závěs, a po zavření se na něm zafixuje.

Důležité

Jde o print-in-place model. Není potřeba žádná montáž.

Po vytištění je potřeba klouby jemně rozhýbat, aby mechanismus fungoval plynule.

Testováno na PETG. Fungovat by měl i s PLA.

Doporučené nastavení tisku

  • Materiál: testováno na PETG, fungovat by mělo i PLA

  • Perimetry: výchozí nastavení stačí

  • Výška vrstvy: výchozí nastavení stačí

  • Výplň: výchozí nastavení stačí

  • Podpěry: Ne

  • Orientace tisku: dle dodaného modelu

Poznámky

Logo zobrazené na fotografiích není součástí modelu. Jde pouze o ukázku možné úpravy.

Tags