TrustFire MiniX3 Defuser Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A defuser shade to put on the end of a TrustFire MiniX3 flashlight to turn it into a lamp.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
A defuser shade to fit on the end of a TrustFire MiniX3 flashlight to turn it into a camp lantern/lamp.
There is a mark on that should face the button on the flashlight so the LED light sits over the code that help deflect the light.
I used white/ glows blue Glow-In-The-Dark PLA from Anycubic. After turning it off, it will continue to glow blue, fading to a white glow that will last the night to help you find your flashlight in the dark.
Prints with no supports
I recommend 2-3 walls and only 2-3 bottom and top surfaces and 0% infill to keep it thin. I used an Archimedean spiral pattern for the top and bottom surfaces. I also recommend printing the test collar to check your tolerances against your flashlight. I made them tight to fit snug, but each person's printer is different. You may need to increase or decrease your xy hole size.
I provided the STEP file in case anyone wants to make changes. Please leave a comment and a picture to let me know your thoughts.