Lids for Tower pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple lid for the Tower model by TasteofCustom
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
The top surface is too open for my needs, so I made this lid. It comes in three variants.
Lid with a closed hole for a finger to make it easy to remove.
Lid with a open hole of the same size. Fits a plant sensor, like ThirdReality's soil moisture gen2.
Lid without the hole of the finger.
Each is a half circle, so you'll need to print two.
Source available on my github repository: https://github.com/m-abs/openscad-models/blob/main/Tower%20pot%20-%20TasteOCustom/lid.scad
The pot and lids in the photo was printed in PETG at 70% scale. 10% infill and 3 walls, 4 top and bottom layers.