Steamdeck USB-C Charger Cradle with built in stand (USA Plug)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.61 – €4.41 net (excluding VAT)
For file: Steambox stand leaner_0.2mm_PLA_MK3S_4h4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.01 excluding VAT (range midpoint).
- Weight reported by the author
- 49 g
- Print time reported by the author
- 4.07 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remix of the charger cradle with a stand built in allowing an on the go stand.
- Rating
- 5 / 5
- Likes
- 75
- Downloads
- 581
- Makes
- 2
- Views
- 6,811
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: I have added a new version that has thinner walls. I made the inner walls angled to run parallel with the exterior walls. They are 3mm thick and should be plenty strong for normal usage. The cord sits inside much better without a lid to assist since the walls now hold it in place. I did have to remove the sd card holders to accomplish this.
I cut a groove through the length using a slightly enlarged cad model of the steam deck. This means it is shaped perfectly to hold the deck. The front would have contacted the screen so I curved it away right before the screen. There is a picture to illustrate. Does not block any of the screen and feels very sturdy.
This model was rebuilt from scratch since there were no cad files provided. I worked from the original dimensions as best I could but there may be very minor difference in dimensions. The inner curved walls is one such area.