Quadratic planter - plate and pot with drainage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalist square indoor planter with a matching drip tray that catches drainage water without letting the pot sit in it
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A simple, functional square planter designed for indoor plants. The pot has 18×18 cm internal dimensions and stands 20 cm tall, with 25 drainage holes in the bottom. The matching tray has internal corner ridges that hold the pot 8 mm above the floor, giving roughly 240 ml of water capacity below the pot — water drains freely without seeping back up through the holes.
Specifications:
Pot inner: 180 × 180 × 200 mm
Pot outer: 186 × 186 × 203 mm
Tray outer: 196 × 196 × 25 mm
Wall thickness: 3 mm (pot), 4 mm (tray)
5 × 5 grid of Ø6 mm drainage holes
0.2 mm clearance per side between pot and tray cavity
Print settings:
Material: PLA (PETG also fine; not tested in ABS)
Layer height: 0.2 mm
Perimeters: 3
Infill: 15–20% (gyroid recommended for the tray)
Supports: none required
Brim: 5 mm recommended for the tray due to the large flat footprint
Bed temp: 60 °C first layer, 55 °C after
Print orientation: both parts as-oriented in the file (flat side down)
Print time / material (approx.):
Pot: ~12–15 h, ~670 g
Tray: ~5–7 h, ~190 g
Notes:
Designed for indoor use. PLA is fine for typical room conditions but will soften in direct summer sun behind glass — consider PETG if the planter sits on a hot windowsill.
Empty the tray periodically; standing water for long periods can stain the bottom of the tray and isn't great for the plant either.
Tested on a Prusa CORE One.
Files included:
pot_18x18x20_4.3mf— main planter
plate_v2_with_ridges_2.3mf — drip tray with internal ridges