(Parametric) Pipe mask / Flange / Rosette / Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric Pipe Mask: Internal Diameter, Thickness and Height
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 109
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Intro
I'll cut right to the chase: here's a parametric Pipe Mask that should fit almost all pipes amd cover any contractor caveman that can't seem to make a simple hole in a wall (tile) to fit the plumbing pipes.
Made in (Autodesk) Fusion (360) and conjured up this thing with 3 simple usable parameters.
Parameter list
Name | Unit | Expression | Comments |
Internal_Diameter | mm | 35 mm | Pipe Diameter |
Flange_thickness | mm | 20 mm | How thick/wide it should be. It should not be less than a 5th of the Internal Diameter!!! |
Height | mm | 5 mm | Same as name :) |
Parts List
A single print. No assembly required. Well... print it twice, if it's not already obvious :D.
Files:
File Name | Comment |
|---|---|
Flange.f3d | Fusion 360 file with customizable Parameters |
Flange.35.20.5.stl | STL with the standard parameters (see above) |
NOTE: in case additional sizes are needed and you don't have Fusion, I'll be happy to upload an STL with other dimensions.
Filaments:
PLA, PETG
Printed Parts:
Special Print Instructions:
0.2mm Layer Height
Minimum 2 perimeters
Non-Printed Parts:
N/A