RoboUp T1200 Pro Cutting disc with spacers.

Found a need for this after the original cracked after hitting either a tree root or rock in the yard while I was at work. Since this cannot be purchased directly from the OEM without a warranty claim, I figured this was a good use case for my 3d printer/Solidworks Maker subscription.

****This design is intended for printing 100% solid in PETG, ASA or ABS--DO NOT PRINT IN PLA as it will shatter during usage if you do****

I printed these in White PETG on my Elegoo Centauri Carbon 2, YMMV on other printers but I'm sure any modern machine by Prusa/Bambulabs/Elegoo can handle it (not sure about older machines for the spacers).

WARNING: Assembly of the spacers to the screws is a bit difficult due to the clearances involved, but if I can do it I'm sure other can as well. I used a tiny pair of pliers to hold the wide OD of the spacer while tightening the screw/blade down to it, then screwed that assembly into the disc before mounting on the mower.

Note about Remixes, etc.: I am supplying the STEP files directly since modern slicers have support for that format (and why would you only upload STLs anyway?).

If someone wants to take a stab at remixing the spacers/disc they can do so, just please give credit to this listing if you do so that I can point people to your remix if it solves the assembly problem with the spacers. Video below showing how the blades should easily swing after assembly.

Click here to see a video of it in action (the mower with the disc, can't actually see the disc while it is running):

https://drive.google.com/file/d/1TojUTWbjjCiK8SBSLq9iENEQ7rIZj0sz/view?usp=sharing