RJ45 Ethernet Breakout Board Case (4 2pin Sensor cable over RJ45)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for a RJ45 Ethernet Breakout Board.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I needed to bring new PT1000 cables from one end of a room to another.
Simply didn't want to handle 4 cables and got those breakoutboards from amazon:
https://www.amazon.de/dp/B0G8GXTRW3
I design a case for it that fits my needs.
You will need
any breakoutboard with similar measures - I designed it extra tight so you may use an ale to grind edges or even border.
2 mini screws 2mmx3mm to hold the board if its too lose
2 3mm screws with about 12mm to hold the case together
Sorry for the mess in the freecad file had no time to clean up
There is a "holder" which fits in my water-heater where I put the case in - you will not need that.
There is a plate where I put on my personal cable pinning info - you also may not need that.
I added a blank label if someone has to experience changeing files