Resin Funnel Stand with Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand and Lid for Liquid Resin Funnel
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 1
- Views
- 59
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Resin Printing requires funnels for several operations - cleaning the vat after a failed print, swapping the resin type or just putting the resin away. Having a funnel with a built in filter is great for catching little pieces of failed print swimming in the goo. You can see from the 3rd picture that a cup will work fine for catching resin drippings and serving as a stand but its not idea. You don't know what resin the funnel is contaminated with and the cup is easy to knock over.
This design perfectly matches the following funnel:
https://www.amazon.com/dp/B0B1TVZKRV
It allows for labeling so you don't cross contaminate resins such as grey and clear resin
It prevents knocking over the funnel
It keeps dust and other contaminates out of the funnel and out of your resin containers
No supports are required. Any Material should work but I use:
Polymaker ASA
0.2mm Layer Height
15% Infill
I use the following settings to add the text to the lid if you want to match the photos exactly:
Blue on White ASA makes it extremely easy to read in low light and ASA ensures that this wont melt in my garage when the temps get to 140f this summer.