1 / 1
Lilium flower HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created an lilium flower HueForge.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with 100% infill and a layer height of 0.08mm. The base layer should be 0.16mm.
Swap procedure: Initial filament: Black
Switch to the next filament at layer #7 (0.64mm): Green
Switch to the next filament at layer #9 (0.8mm): Orange
Switch to the next filament at layer #11 (0.96mm): Magenta
Apply color only to the outline from here to the end.
Switch to the next filament at layer #27 (2.24mm): White (Use until the final layer)