1 / 1
Case for MKS Pi-TS35 touch screen using heat set inserts for the front
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for MKS Pi-TS35 touch screen using heat set inserts for the front
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
In the original model I wasn't too sure what screws to use but saw the potential for heatset inserts. The holes were enlarged to allow the use of M3 x 5 x4 (Voron standard) heatset inserts.
Hardware required
-4 x M3 x 5 x4 heatset inserts
Screw length is M3 x 12mm if you are going to just hold the back in place.
**with remixed mount M3 x 16mm