1 / 5
Pythagorean Cup — Greedy Cup / Cup of Justice (parametric) — image 1
1 / 5

Pythagorean Cup — Greedy Cup / Cup of Justice (parametric)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Drink from it normally and it works like any cup; fill it past the 'greedy line' and the entire contents siphon out the

Rating
0 / 5
Likes
2
Downloads
13
Makes
0
Views
50
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution

A working Pythagorean cup — also called the greedy cup or cup of justice (κύλιξ τῆς δικαιοσύνης). Attributed to Pythagoras of Samos around the 6th century BC, it's a vessel that rewards moderation: fill it modestly and it holds liquid like any cup; fill it past the hidden "greedy line" and the entire contents siphon out through a hole in the bottom — usually into the user's lap.

How it works: inside the cup, a hollow column rises from the floor. Two parallel vertical bores run through the column. One (the riser) is open at the cup floor and runs up to a bend near the top. The other (the descender) starts at that bend and runs down through the underside of the cup to a small drain hole. A horizontal channel at the top connects them — the inverted-U "siphon bend".

  • Fill below the bend → cup-side fluid level matches riser-side level (communicating vessels). Bend stays dry. No flow.

  • Fill above the bend → fluid spills over the bend into the descender. Once the descender is primed, gravity siphons the entire cup out through the bottom hole until air enters the riser at the floor.

Working dimensions (default): Ø 50 mm × 60 mm tall. Greedy line at ~80 % fill (z = 48 mm). Walls 1.6 mm (4 perimeters at 0.4 mm nozzle). Drain hole Ø 4 mm.

Parametric — change the size in one line. The included .scad exposes cup_d (diameter) and cup_h (height) as top-level parameters. Want a tall narrow shot-cup or a wide goblet? Edit those two numbers and re-render. The siphon bend, bores, drain, and column geometry all follow automatically; the greedy line stays at ~80 % of cup_h.

Print notes (Bambu P2S, 0.4 mm nozzle, 0.2 mm layer, PLA tested):

  • Print upright, bottom face on bed. No supports.

  • The horizontal siphon bend is a 4–5 mm Ø 4 mm bridge — Bambu prints cleanly at this scale.

  • Use waterproof / food-safe filament if you intend to actually drink from it. PLA holds water for casual prank use; for repeated use consider sealing with a food-safe epoxy or printing in PETG.

Tested working — verified with the default dimensions: water below the bend is held; water above the bend siphons out completely through the drain hole. Classic dinner-party trick / physics demo.

Tags