1 / 1
Water Reservoir for Fluid Dynamics
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a quick design of a water reservoir with a small hole in the side. There are 3/4/5 mm holes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a small water reservoir for my students to use when investigating fluid dynamics. This one has lines on the front face every 5 mm. If you shine enough light through the top, you should be to see the water level on the lines.
If you have the force meter scale conversion, you can put this water reservoir on top of it and measure the weight change. The water will block a photogate, so you can get measurements for the velocity based on the distance and timing.
Enjoy!