1 / 2
Anti Wind Clothes Rack Hanger Helper for IKEA RIGGA — image 1
1 / 2

Anti Wind Clothes Rack Hanger Helper for IKEA RIGGA

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The wind will no longer take all your laundry to one end of the IKEA RIGGA drying rack when you hang clothes up to dry.

Rating
0 / 5
Likes
1
Downloads
2
Makes
0
Views
52
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

We use IKEA RIGGA racks to dry laundry on inside/outside the house. When outside, the wind often causes all the clothes hangers to slide down one end of the rack, causing the clothes to dry slowly as they are all bunched together.

These clip on separators are designed to give slots that hangers can be hung in, that ensures they stay separated, even when it is windy.

Designed for IKEA RIGGA which is a 25mm diameter pole, but the model is parametric allowing the ID and OD to be adjusted.

You might need to adjust the object diameters based on the tolerance and accuracy of your printer. I find that if I clip them on when they are still warm from the printer, they are a little more "compliant" but if you dial your sizes correctly, they will clip on firmly even when cold. 

(if you look closely, one of the modules in the photo is actually cracked, as I was still dialing in the size when I printed that module.)

Tested on a windy day, they work great!

Tags