1 / 2
ERCF MG996R Servo Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Selector for the ERCF to use a cheap but powerful MG996R Servo in place of the tiny MG90 or Savox SH0225MG.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I got frustrated with killing savox servos, so i thought why not use a spare MG996R servo i had spare from the erec. I had to completely redesign the selector to fit everything. I have tried it using a pair of 6x10mm springs with 0.8 wall thickness and it works very well. id recommend starting with 0.5 or 0.6 springs to start and work up if needed. The hole tolerances are quit tight u may need to adjust to suit your printer. please check the cad model for bom