Stand for U7 Pro Wall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a robust, easy to print stand for Ubiquiti's U7 Pro Wall access point.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This is an easy to print desk stand for Ubiquiti's U7 Pro Wall access point. It's low profile; the access point stands only about an inch above the desk so less risk of it getting tipped over by a cat (Kitt, you know who you are). No supports needed if you print it standing upright. I printed it in Rapid PLA Pro, with 3 walls and 15% gyroid infill. It's solid enough that I'd feel comfortable using regular PLA too. I attached the wall plate to the stand using self-tapping screws for PC case fans. If you don't have a million of those lying around, it's designed for use with bolts and nuts too.