Bosch 1590 EVS Shoe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This shoe prevents your 1590EVS jigsaw base from scratching up your workpiece. You may want to hit the edges with some…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 1
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This shoe prevents your 1590EVS jigsaw base from scratching up your workpiece. You may want to hit the edges with some 220 grit to round them over slightly and soften the corners so they don't cause scratches.
This is a work in progress so files may be updated as I make tweaks to the design or to print parameters.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Infill:
20%
Filament:
PRUSA PLA 1.75
Silver
Notes:
The two lips on the front need support. I used the brush on support option in PRUSAslicer. Should fit snugly, no force needed. Rip guide can be used with this shoe.
Print time is about 1:45 on the [i3 MK3S](https://www.amazon.com/3D-Printer-Prusa/s?k=3D+Printer+Prusa&linkCode=ll2&tag=thingiverse09-20&linkId=28c787aef7c5a20cf2004b821dd161bf&language=en_US&ref_=as_li_ss_tl)+Post-Printing
Need to remove and clean up the two supports after printing. They come off easily then a minute to do some minor trimming with a utility knife.
Category: Parts