Iwata Cup Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cup cap for an IWATA airbrush.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 108
- Makes
- 0
- Views
- 497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Iwata Cup Cap
A cup cap for an IWATA airbrush.
I bought my Iwata airbrush with a large-capacity cup and used an angle-grinder to cut it down to the size I preferred (mad, I know). That meant that the cup cover didn't fit so I designed this cup dust cover for my particular needs. Could be scaled (through trial and error, perhaps) to fit another airbrush cup.
Material: PLA
Layer height: 0.1 mm
Supports and Brim: None
The inside diameter of my cut-down cup is 23.16 mm. No idea what the original cup size was. A metal file and some 3000-grit wet'n'dry paper fixed any issues…
Regards, Paul